PDF Pattern Leather Cactus Box and Keychain
The PDF contains a 5 page pattern to make your own cactus box and a 1 page pattern for a matching keychain. If there's an area that you did not understand in the build along video, please contact me.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for letter/ 8.5" x 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
This project requires:
The Box
Materials needed for this project:
- 5-6 oz leather, regular to stiff
- 0.8mm thread
- 2-3 oz leather for flower
- 9mm cap 8mm post rivet 1
The Keychain:
Materials needed for this project:
- 2-3 oz soft leather for cactus
- 2-3 oz regular leather for po and flower
- poly-fil/stuffing
- 0.8mm thread
- 10mm jump ring
- swivel hook/Keyring
If there is a problem or instructions are unclear, please contact me.
The PDF contains a 5 page pattern to make your own cactus box and a 1 page pattern for a matching keychain. If there's an area that you did not understand in the build along video, please contact me.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for letter/ 8.5" x 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
This project requires:
The Box
Materials needed for this project:
- 5-6 oz leather, regular to stiff
- 0.8mm thread
- 2-3 oz leather for flower
- 9mm cap 8mm post rivet 1
The Keychain:
Materials needed for this project:
- 2-3 oz soft leather for cactus
- 2-3 oz regular leather for po and flower
- poly-fil/stuffing
- 0.8mm thread
- 10mm jump ring
- swivel hook/Keyring
If there is a problem or instructions are unclear, please contact me.
The PDF contains a 5 page pattern to make your own cactus box and a 1 page pattern for a matching keychain. If there's an area that you did not understand in the build along video, please contact me.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for letter/ 8.5" x 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
This project requires:
The Box
Materials needed for this project:
- 5-6 oz leather, regular to stiff
- 0.8mm thread
- 2-3 oz leather for flower
- 9mm cap 8mm post rivet 1
The Keychain:
Materials needed for this project:
- 2-3 oz soft leather for cactus
- 2-3 oz regular leather for po and flower
- poly-fil/stuffing
- 0.8mm thread
- 10mm jump ring
- swivel hook/Keyring
If there is a problem or instructions are unclear, please contact me.