PDF Pattern Leather Eyebat Plush Keychain
This purchase contains a 2 page PDF pattern to make your own leather eyebat plush keychain. It's a relatively simple and straightforward build, the hardest part is just turning out the wings. Including the wingspan, it's about 9 inches wide, while the eye itself is a little less than 3 inches.
This is not the physical product, only the digital pattern.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for US letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 1-2 oz soft leather, garment leather
- thicker leather for the tab piece (4oz)
- 0.8mm thread
- poly-fil/stuffing
- Swivel hook/Key ring
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This purchase contains a 2 page PDF pattern to make your own leather eyebat plush keychain. It's a relatively simple and straightforward build, the hardest part is just turning out the wings. Including the wingspan, it's about 9 inches wide, while the eye itself is a little less than 3 inches.
This is not the physical product, only the digital pattern.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for US letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 1-2 oz soft leather, garment leather
- thicker leather for the tab piece (4oz)
- 0.8mm thread
- poly-fil/stuffing
- Swivel hook/Key ring
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This purchase contains a 2 page PDF pattern to make your own leather eyebat plush keychain. It's a relatively simple and straightforward build, the hardest part is just turning out the wings. Including the wingspan, it's about 9 inches wide, while the eye itself is a little less than 3 inches.
This is not the physical product, only the digital pattern.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for US letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 1-2 oz soft leather, garment leather
- thicker leather for the tab piece (4oz)
- 0.8mm thread
- poly-fil/stuffing
- Swivel hook/Key ring
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.