PDF Pattern Leather Iron Maiden
The PDF contains a 7 page pattern to make your own Iron Maiden. The stitching on this project is can be a bit tricky in the head area so be aware. If there's an area that you did not understand in the build along video, please contact me.
This listing is for the digital pattern only and does not contain the physical product.
This iron maiden is just a little over 14.5 inches tall and is about 6 inches at the widest. It has a hinge design on the doors for opening ease. Links to the hardware used in this build can be found in the description of the instructional video
PDF is intended for letter/ 8.5" x 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced about 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
This project requires:
Materials needed for this project:
- 5-6 oz leather stiff
- 0.8mm thread
- Small swing clasp latch 1.13 x 1 in
- 8mm post 9mm cap rivet 4
(for the swing clasp latch)
- 1/2 inch Screw Back D ring 2
-10 mm post 9mm cap rivets 16
- 1.5 inch chicago crews 4
- 7mm cap/post rivets 37
- 1 inch cone spikes 26
If there is a problem or instructions are unclear, please contact me.
The PDF contains a 7 page pattern to make your own Iron Maiden. The stitching on this project is can be a bit tricky in the head area so be aware. If there's an area that you did not understand in the build along video, please contact me.
This listing is for the digital pattern only and does not contain the physical product.
This iron maiden is just a little over 14.5 inches tall and is about 6 inches at the widest. It has a hinge design on the doors for opening ease. Links to the hardware used in this build can be found in the description of the instructional video
PDF is intended for letter/ 8.5" x 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced about 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
This project requires:
Materials needed for this project:
- 5-6 oz leather stiff
- 0.8mm thread
- Small swing clasp latch 1.13 x 1 in
- 8mm post 9mm cap rivet 4
(for the swing clasp latch)
- 1/2 inch Screw Back D ring 2
-10 mm post 9mm cap rivets 16
- 1.5 inch chicago crews 4
- 7mm cap/post rivets 37
- 1 inch cone spikes 26
If there is a problem or instructions are unclear, please contact me.
The PDF contains a 7 page pattern to make your own Iron Maiden. The stitching on this project is can be a bit tricky in the head area so be aware. If there's an area that you did not understand in the build along video, please contact me.
This listing is for the digital pattern only and does not contain the physical product.
This iron maiden is just a little over 14.5 inches tall and is about 6 inches at the widest. It has a hinge design on the doors for opening ease. Links to the hardware used in this build can be found in the description of the instructional video
PDF is intended for letter/ 8.5" x 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced about 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
This project requires:
Materials needed for this project:
- 5-6 oz leather stiff
- 0.8mm thread
- Small swing clasp latch 1.13 x 1 in
- 8mm post 9mm cap rivet 4
(for the swing clasp latch)
- 1/2 inch Screw Back D ring 2
-10 mm post 9mm cap rivets 16
- 1.5 inch chicago crews 4
- 7mm cap/post rivets 37
- 1 inch cone spikes 26
If there is a problem or instructions are unclear, please contact me.