PDF Pattern Leather Smiling Zipper Mask Active
Inspired by Tokyo Ghoul, this purchase contains a PDF pattern to make your own smiling zipper mask.
This is not the physical product, only the digital pattern. If you are interested in buying a finished mask, send me a message
PDF is intended for letter/8.5" by 11" paper, print in actual size (100%).
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 5-6 oz leather for the outside
-2-3 oz leather for the gums and 4-5 oz teeth
(the gums and teeth could be made in the same thickness of leather)
- 0.8 mm thread
- 10 rivets
- 3/4 in buckles 2
- 5.25 in zipper
- 3/4 in rectangle ring
or D rings 4
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Inspired by Tokyo Ghoul, this purchase contains a PDF pattern to make your own smiling zipper mask.
This is not the physical product, only the digital pattern. If you are interested in buying a finished mask, send me a message
PDF is intended for letter/8.5" by 11" paper, print in actual size (100%).
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 5-6 oz leather for the outside
-2-3 oz leather for the gums and 4-5 oz teeth
(the gums and teeth could be made in the same thickness of leather)
- 0.8 mm thread
- 10 rivets
- 3/4 in buckles 2
- 5.25 in zipper
- 3/4 in rectangle ring
or D rings 4
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Inspired by Tokyo Ghoul, this purchase contains a PDF pattern to make your own smiling zipper mask.
This is not the physical product, only the digital pattern. If you are interested in buying a finished mask, send me a message
PDF is intended for letter/8.5" by 11" paper, print in actual size (100%).
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 5-6 oz leather for the outside
-2-3 oz leather for the gums and 4-5 oz teeth
(the gums and teeth could be made in the same thickness of leather)
- 0.8 mm thread
- 10 rivets
- 3/4 in buckles 2
- 5.25 in zipper
- 3/4 in rectangle ring
or D rings 4
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.