PDF Pattern Leather Tombstone Backpack
The PDF contains a 13 page pattern to make your own tombstone backpack
The bag itself is about 13 inches in height and about 9 inches wide. This design requires precise cutting so ensure you're using a fresh blade.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for A4/8.5" by 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 5-6 oz leather stiff
- 0.8mm thread
- Size 36 rivet post 10mm, size 34 cap 9mm, 8
- Size 34 rivet 8mm post, 9mm cap, 8
- 7-8 oz bridle leather for straps
- 1 inch buckle, 2
- 1 inch rectangle ring, 6
- 12 inch #5 closed end zipper
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
The PDF contains a 13 page pattern to make your own tombstone backpack
The bag itself is about 13 inches in height and about 9 inches wide. This design requires precise cutting so ensure you're using a fresh blade.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for A4/8.5" by 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 5-6 oz leather stiff
- 0.8mm thread
- Size 36 rivet post 10mm, size 34 cap 9mm, 8
- Size 34 rivet 8mm post, 9mm cap, 8
- 7-8 oz bridle leather for straps
- 1 inch buckle, 2
- 1 inch rectangle ring, 6
- 12 inch #5 closed end zipper
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
The PDF contains a 13 page pattern to make your own tombstone backpack
The bag itself is about 13 inches in height and about 9 inches wide. This design requires precise cutting so ensure you're using a fresh blade.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for A4/8.5" by 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 5-6 oz leather stiff
- 0.8mm thread
- Size 36 rivet post 10mm, size 34 cap 9mm, 8
- Size 34 rivet 8mm post, 9mm cap, 8
- 7-8 oz bridle leather for straps
- 1 inch buckle, 2
- 1 inch rectangle ring, 6
- 12 inch #5 closed end zipper
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.